1) For medical protective clothing to purchase products of reliable quality, the varieties that have been inspected by professional technical departments and meet current standards should be purchased through specialized labor insurance stores.
2) Prepare, wear and maintain properly before use. medical protective clothing
3) Quality inspection: Before the protective clothing is purchased and worn, its quality should be checked against the technical conditions of the product.
4) Familiar with the performance: Read the product description carefully, be familiar with its performance and precautions, and carry out the necessary try-on training.
5) Wear according to the method described in the manual. Product color: white; record certificate: Yuesui Food and Drug Administration Production No. 20170006; Scope of application: used for general isolation in outpatient clinics, wards, and laboratories of medical institutions; Product model: S (160), M (170), L (175), XL (180), XXL (185), XXXL (195);
06) Product performance: It is made of non-woven fabric as the main raw material after cutting and sewing. Provided non-sterile, single-use;
07) Installation and use: Open the sealed zipper of the isolation gown, first extend into the right leg, then into the left leg, lift the isolation gown to half waist, then put on the hat and zip it to the neck to complete the wearing;
08) Precautions: If the isolation gown is contaminated, worn or damaged, please stop using it immediately and handle it properly; this product ignites, and please keep away from heat sources and open flames when using or storing it;
09) Maintenance: If not used for a long time, it should be kept tightly closed;
10) Configuration list: one isolation gown, one product manual;
11) Warning content: The product is one-time use, and discarded into the medical trash can after use;
12) Storage conditions: The packaged product should be stored in a dry, non-corrosive gas and well-ventilated room;
13) Transportation conditions: During transportation, care should be taken to prevent extrusion, sharp objects, moisture and oil pollution;
